Search results
STEP 1. Park and turn off your car. Ensure the emergency break is on. STEP 2. Grab the depth gauge, find the pin, and insert it into the grooves between the treads of the tire. Press down on the base plate of the gauge unit until it's flush with the tire tread. STEP 3. Repeat step 2 in at least 4 different places on each tire for an accurate read.
The typical new tire used on automobiles is measured with 10/32” to 11/32” of tread depth. With winter/snow and light truck tires the tread is deeper because this depends on the tire’s tread type, which is either the Highway Rib, Highway All-Season, Off-Road All-Terrain or Off-Road Maximum Traction.
Learning how to check tread depth is the best way to tell if your tires are safe for another season or if they’re almost ready to retire. Tires that don’t have enough tread depth put you at greater risk of hydroplaning, punctures and reduced traction.
There are four quick and easy methods of how to find your tire’s tread depth. Watch the video below and learn how a penny, a quarter, a tread depth gauge, or even an indicator built into your tire’s tread can help you understand when it’s time to replace your tires.
May 19, 2022 · A good tire tread depth for most conditions is usually 6/32 and higher. If the number is 4/32, that's a sign you should think about replacing your tires. If you still ignore the tire tread depth gauges and it is down to 2/32 or less, you should not be driving with those tires as it can be life-threatening on wet roads and at high speeds. 7.
Aug 12, 2022 · A good tire tread depth is 5/32″ or greater. Tires with 4/32″ or less depth are recommended to be replaced. Once tires reach 2/32″ they are considered bald must be replaced for your safety. Stopping distance on wet roads increases as tread depth decreases. The risk of hydroplaning also increases.
Apr 1, 2021 · A simple way to check your tire tread depth is by using a tread depth gauge. You can find tire tread depth gauges at your local auto parts store. There are many models available, but an inexpensive simple graduated probe gauge will work just fine.
