Search results
The DM-3200 has 16 analogue inputs while the DM-4800 offers 24 analogue inputs. The Routing section allows you to assign a channel to one or more busses and/or the stereo bus. With the DIRECT button you can use a channel as direct output. Library buttons for saving and recall- ing settings are located on the lower right.
Dec 30, 2015 · here is the step by step process i use (mixing to 32 tracks)... 1. make sure your dm3200 interface is set to 32 in and 32 out. 2. in protools, set each track output to a corresponding input (s) on the dm3200. 3. in the dm3200, set your routing CH 1 - 30 to slot 1 inputs 1 through 30. 4. mix your session (make sure you monitor through the stereo ...
2 – Starting out with the timecode. While the TASCAM DM automation system is extremely powerful, it is also very easy to use. This Quick Start covers much of what you need to know to run the system. The rest of the manual provides details on the con-cepts of the system and how to use it to its fullest potential.
manuál Tascam DM-24. Digital Mixing Console. Professional. OWNER’S MANUAL. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT. REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point with in an equilateral triangle is intended to alert the user to the pres-.
It will not function in Slot 2 or Slot 4. • The following installation must be done with the mixer’s power OFF and disconnected. 1. Remove the five screws holding the blank plate or card currently installed in Slot 1 (or Slot 3 on the DM-4800) then remove the plate or card. 2. Insert the IF-FW/DM MKII into the slot, making sure that
IMPORTANT SAFETY INSTRUCTIONS. Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
