Search results
Feb 10, 2012 · In my understanding the 'auto-flush' is more of an 'auto-drain' - simply draining the water in the tank as opposed to actually flushing it out. The install manual says I can use the cold or hot water line for supply, but recommends the hot.
Customers should be mindful of all the requirements that go into installing a steam shower. These include: Ensuring that they use steam-rated material for their shower; Fully enclosing the shower in a glass enclosure. I recommend a transom for ventilation. Making sure a fan is NOT installed inside the shower. I have actually seen this mistake a ...
- Generator Placement FAQs
- Steamhead Placement
- Plumbing Connections and Insulation
- MrSteam Accessories
- The Aromasteam System
- Do You Have Additional MrSteam Plumbing Questions?
How far away can I place the generator from the shower?
MrSteam generatorscan be installed up to 60 feet from the steam room when steam lines are properly insulated. The generators come standard with a 30-foot cable, but an optional 60-foot cable is available for purchase if needed. We do recognize that sometimes the bathroom design or other factors requires that you exceed this 60-foot line. If you are faced with a situation like this, we recommend that you consult with MrSteam through our Customer Service Expertsto learn how best to proceed. >>...
Why must we install the generator with a 12" clearance? Is it because of the heat?
The generator should be installed with a 12″ clearance, though the back of the steam unit can be placed against a wall. The reason for this is not because of heat. MrSteam generators are zero tolerance, which means they don’t become hot on the outside. The 12″ clearance is only needed for any future service and maintenance.
Can the steam generator be installed above the shower?
Yes, you can situate the generator above the shower. However, make sure that you do not install the generator or plumbing lines in an unheated attic or any other location where water could potentially freeze. The generator can also be located in a service room, equipment room, or boiler room in a high rise, under a vanity, in the wall, or almost anywhere else. The one thing to be certain of is that you provide easy access as required by electrical codes for future maintenance and potential se...
How far should the steam head be off the floor?
Position the steam head6″ to 12″ off the floor. This ensures that the steam will be emitted at just the right level to fill the steam shower from top to bottom.
Is it okay to put the steam head near the bench?
Placing the steam head near someone’s seat could make the steam shower experience less than pleasant. The steam head and the steam emissions are extremely hot, so you should not locate the steam head where someone might come into direct contact with these elements. Because of this, MrSteam recommends positioning the steam head at a distance from the seating area.
Is it all right to use PEX tubing, or PEX pipe, to install the generator?
No. PEX is plastic and is not rated for steam, which reaches temperatures of 212ºF.
Can the steam line be run down and up?
Absolutely not. The steam line should never create a “U,” as this forms a trap. The trap, the lowest point in the system, collects condensation. Subsequent back pressure in the system created by condensation in the trap can become hazardous. Residential steam generators are intended for atmospheric operation only, and back pressure in the steam line created by the trap will force the pressure relief valve on the steam generator to open.
Which way should we pitch the steam line?
The steam line can be pitched in either direction, either toward the steam outlet or toward the steam generator. The pitch should be ¼″ per foot, which allows all the water and condensation to drain from the steam line.
Is the AutoFlush unit really necessary?
Extending the life of your steam generator unit is important. Doing so with the AutoFlushwill mean far fewer maintenance calls – which ultimately translates into a happier steam bather and homeowner! AutoFlush flushes sediment out along with left-over water after every steam. This means that sediment takes a much longer time to build up. While many users enjoy their steam showers daily or weekly, other bathers may wait a long period between steams. With the AutoFlush unit, you avoid the probl...
Is a pressure reducing valve really necessary?
Nobody likes a noisy steamshower, which might detract from the bather’s sense of tranquility and desire to escape the stresses of everyday life. MrSteam recommends installing a pressure reducing valve to reduce the water intake noise.
Can we drain back into the shower?
I’m not sure why anyone would want to drain back into the shower. It’s not necessary to push water and any possible sediment through a steam head back into a shower and onto tile and grout, especially in a newly renovated shower. To keep the shower looking immaculate and new, it is best to flush dirt and sediment into a drain.
How far away can we position the AromaSteam System?
The ideal location for the AromaSteam Systematomizing nozzle is within 10 feet of the steamhead. The length of tubing between the AromaSteam pump and the atomizing nozzle in the steam line shouldn't exceed 30 feet. Unlike the generator, you can’t install it on a separate floor as the maximum height difference between the AromaSteam System and the atomizing nozzle can’t exceed six feet. Meeting these requirements will ensure that the aroma oil is fully vaporized for even distribution in the st...
Our Customer Service Expertsin New York City and Los Angeles are available to assist you eleven hours a day. We’ll give you experienced assistance every step of the way. Do let us know if there are any other plumbing questions we can answer – and congratulations on making the right steam shower choice!
steam shower installations. In short, if you fully water- and vapor-proof the shower, provide ample space for the steam generator device along with a good safety pan and drain, and find a way to put ventilation in the shower, it. will work for the. ides, including the ceiling. Typically, it’s tiled on all sides with a tempered-safety-glass door a.
Jan 6, 2024 · This diagram will show the location of the shower head, the drain, the valves, and the pipes, as well as how they all connect to the water source. With the help of this diagram, one can easily understand the necessary steps for installing a steam shower and ensure that it is done correctly.
Fill the tank with between 5 to 10 grams of citric acid diluted with about 1.5 liters of warm water. Let it set for 12 hours before turning it on to heat the water. This will vaporize the citric acid. The steam generator will have a manual drain valve. This valve should be drained approximately every 2 months.
People also ask
Can you put a steam head into a shower?
Can a steam generator drain from a tub?
How does a steam shower steam generator drain?
Does a thermasol steam shower flush from a drain pipe?
Does a steam generator drain if there is a leak?
How do you clean a steam shower?
Poor sealing is a common mistake that leads to steam escape, reducing the therapeutic effectiveness of your steam shower and potentially causing damage to your bathroom’s walls and flooring. Water vapor can seep into crevices and unseen areas, causing hidden damage over time.
