Search results
Simply sand down your trim to remove the current stain and smooth out the damaged areas. Sanding will also enable your fresh stain to soak into the wood. After cleaning the sanded trim and allowing it to dry, use a stain that matches your trim. Apply using a cloth and rub in the stain and wipe away any excess.
- 204 S. Main Street, Suite 100, Keller, 76248, TX
- (817) 409-8196
Step 1: Remove the Cap. The first step in replacing rot-damaged trim is to remove the affected areas. Begin by carefully inspecting the trim for signs of rot. Look for discolored or soft spots, particularly in areas prone to moisture accumulation. Once you’ve identified the damaged sections, it’s time to remove them.
Definition of Cornice molding trim - at the intersection of the wall top and room ceiling. Definition of Door casing (or window casing) trim - surrounding doors or windows on the building interior. Definition of Picture molding (not shown) - horizontal trim located approximately 12" below the ceiling in Victorian era homes.
- Remove old paint spots. Soften old paint along the edges of trim and stained baseboards with alcohol. A rag wrapped around a putty knife lets you scrub the trim without slopping alcohol onto the wall.
- Scrape eroded areas. Scrape away badly weathered finish. A carbide paint scraper removes the old finish much faster than sandpaper. But be careful not to gouge the wood.
- Bleach out dark stains. Bleach away deep stains that scraping or sanding won’t remove. You don’t have to scrub; just let the oxalic acid penetrate and lighten the stain.
- Sand bleached areas. Sand the bleached wood after it dries. Start with 120-grit sandpaper. Then sand with 180-grit. Vacuum the dust before staining and finishing.
When it comes to serious damage, you'll have no choice but to replace the entire section. Water damage, wood rot, and significant cracks and dents are not worthwhile to repair. Luckily, our team of experts is pros at interior trim installation. We'll help you find molding that matches what you already have, and ensure it's cut to the right size ...
- 6136 Frisco Square Blvd., Suite 400, 75034, TX
- (972) 439-1191
When caulk gets old or was applied poorly, it can lead to issues with your trim and molding. On average, caulk lasts about five years. To remove caulk gently: Dampen a sponge and run it along the top of your baseboard to loosen it. Gently place a putty knife (or another dull edge) in between the wall and baseboard.
People also ask
Do I need to replace my trim & crown molding?
What is the most difficult part of interior trim repair?
Should I repair or replace my molding?
Are interior trim moldings set in, or recessed?
Can You refinish crown molding?
Does interior trim need repair?
Gently sand and scrape the trim to remove the old paint and finish following the sanding directions above. It’s okay to remove most of the finish and stain as you’ll be repainting or refinishing it. Make sure to fill any holes, dents, gaps, or scratches with wood putty. 3. Stain or Paint.
