Search results
Dec 3, 2015 · Then install 2"x4" crossbracing between the studs at the correct locations for your TV mount. Replace the drywall, tape and mud the joints, sand, prime, and paint. The bracing is now hidden in the wall and you can attach the mount to the bracing. Plywood would work well, but may not provide the nicest of aesthetics.
Jul 15, 2024 · Step 5: Screw the Mount into the Toggle Bolts. Hold the mount against the wall, line up the holes with the bolts, and then press the screws into each hole and tighten them with your hand. But never use a drill, as they can overtighten and damage the drywall. Step 6: Hang the TV Bracket to the Wall Mount.
- Jeff Kunkle
- First, Pick a Good Spot. Before you do any markings or pull out any tools, you’ll need to determine where you’d like to place the television in your living room.
- Figure Out What Mounting Kit You Need. Mounting kits aren’t universal, which means that you’ll need to purchase the one that is right for both your television brand and for the weight of your flat screen.
- Find the Stud. Once you’ve purchased the TV mounting kit, you’ll need to then find the stud in your wall so that your television can be hung securely. To locate the studs in your wall, use your stud finder and mark where they are with a pencil.
- Attach the Brackets to the Television. Before you secure the television to the wall, you’ll need to get the brackets attached to the television. Then, lay a blanket down on the floor and then carefully set your television on it, glass side down.
- Overview
- Getting and Planning Your TV Mount
- Mounting Your TV on Studs
- Using Toggle Bolts for Studless Walls
- Using Toggle Bolts for Studless Walls
Mounting a TV on your wall can create a theater-like experience in your room without using an entertainment center. While it may seem tricky to hang a TV on drywall, there are a few ways to make sure it stays secure without it falling down. Once you get a mount that works with your TV, check if there are studs behind your drywall. If there are, then you can screw the mount directly into the studs. Otherwise, you’ll have to use toggle bolts so the TV doesn’t fall out. Once you’re done installing the mount, you’ll be able to comfortably watch your new TV!
Purchase a TV mount compatible with your TV size and type. Screw the mount's brackets onto the holes on your TV.
Find and mark two studs. Hold the mount to the wall to mark the holes. Pre-drill holes into the marks.
Drill the mount into the wall, and then hook the TV onto the mount. Stand back to check its final position.
Get a mount made for the weight of your TV.
There are many different types of mounts you can get, but they need to be compatible with your TV and support its weight. Check the weight of your TV in its instruction manual or on the box, and write it down so you don’t forget. Search for TV mounts online or at electronics stores for one that fits the size of your TV.
If you want to ensure the mount is compatible with your television, search online for its model number followed by “mount” to find lists of compatible styles. Otherwise, you can get a universal mount that works with multiple styles of TVs.
Full-motion mounts allow you to tilt and turn the TV screen so you can position it however you want it.
Set mounts don’t turn, but you may be able to adjust the direction it tilts up or down.
Screw the mount’s bracket into the holes on the back of your TV.
Mark 2 studs on your wall where you plan to hang the TV.
Use your stud finder to locate 2 adjacent studs in the spot where you want to mount your TV. Once you find the 2 studs, use a pencil to mark them at the height you found earlier for the viewing angle. Check that your marks are the same height using a straightedge or a level.
If the studs don’t line up where you want to place your TV, then you’ll have to mount the TV without studs
Some mounts can be attached to a single stud.
Hold the TV mount against the wall to mark the holes.
The part of the mount that connects to the wall will have multiple holes on the top and bottom. Put the mount against your wall so it’s level and mark the holes that line up with the studs. Pull the mount off of the wall and check to make sure the marks are level again.
Position the TV mount and mark where you want to place the holes.
Hold the mount against the spot on your wall that lines up with your viewing height you found before. Look at the holes on the top of the mount and choose 3 of them that are evenly spaced apart to make your marks. Mark 2 end holes on the bottom of the mount for the bottom support screws. Remove the mount from the wall and check if your marks are level.
Since you don’t have studs to use for support, you need to use more screws to mount the TV to evenly distribute its weight.
in (0.64 cm) holes into the drywall on the marks.
in (0.64 cm) to the end of your drill and make sure it’s tightened. Hold the drill against one of the marks you made so the bit is horizontal and drill through it. Continue drilling through the drywall at each of your marks.
inch (0.64 cm) toggle bolts into each of the holes.
This article was co-authored by
and by wikiHow staff writer,
Jason Phillip is a handyman specializing in mounting and hanging objects onto walls. With over five years of experience professionally mounting and installing objects through his company, Jason's Handyman Services, Jason's work includes working with mounting window AC units, designing art gallery walls, installing kitchen cabinets, and replacing light fixtures on drywall, brick, and plaster. He has been rated a "Top Pro" every year since 2016 by Thumbtack for being one of the highest-rated, most popular professionals on Thumbtack. This article has been viewed 393,471 times.
Appendere una TV a Schermo Piatto alla Parete
Mar 11, 2024 · Once you have fixed the mounting bracket on the wall, your next step is to carefully set your TV upside down and follow the instructions listed in the manual on how to attach the brackets to the TV. Fasten the brackets tightly with screws for TV safety. Only use the recommended screws. 7. Fix the TV on the Wall.
Apr 7, 2024 · Solution: Use a stud finder with built-in wiring and pipe detection features to avoid these hazards. If in doubt, consult a professional. Mounting a TV on drywall is definitely doable, but it requires preparation, the right tools, and a cautious approach. By following these dos and don'ts, you can ensure your TV is mounted safely and securely ...
People also ask
Can You mount a TV on drywall?
How to mount a TV on a wall with studs?
Can drywall damage a TV Mount?
How do you hang a TV on a wall?
Does a TV wall have studs?
How do you mount a 60 inch TV on drywall?
The good news is that you can still mount your TV despite the hollow walls with Mount-It’s No Stud TV Wall Mount that hangs on your wall like a picture frame. Or, you can read on to learn other ways to mount a TV on the wall without studs. 1. Anchors. Anchors are some of the easiest ways to hang anything in the walls without a stud.
