Search results
Aug 21, 2023 · Mounting a TV to the wall without damaging it can be tough if you don’t have a stud to hold the weight. If you hang it from the bare wall board, you run the risk of damaging the wall and the TV.
- Becca Lewis
Nov 14, 2023 · Hold the stud finder against the wall and slowly move it horizontally until it indicates the presence of a stud. Mark the stud’s edges with a pencil to identify its position. If you cannot find centered studs, you can consider alternative anchor points for mounting your TV. These alternative anchor points can include:
- Attach Bracket to TV. Attach the mounting bracket (not mounting plate) to the back of the TV.
- Mark Drill Holes. Hold the paper template or mounting plate against the wall, with the bubble level on top to ensure level. Make sure that you clear studs or other obstructions behind the drywall, as toggle bolts need at least two inches of clear space.
- Drill Holes for Toggle Bolts. Consult the toggle bolt package for the correct hole diameter. The diameter is not the diameter of the bolt. Instead, it will be the diameter of the wing unit attached to the bolt and folded up.
- Attach Toggle Bolts to Mounting Plate. From the front of the mounting plate (the side facing the room), slide the toggle bolts (unattached from the wing units) through the mounting plate holes.
- Brian Westover
- Find the studs. Once you've settled on the perfect spot on the wall, you'll need to find the studs to mount the bracket properly. Mounting your TV wall bracket to the studs provides the structural strength necessary to support a TV that could weigh anywhere between 30 and 100 pounds.
- Mark the hole position. Next you'll need to mark specifically where you plan to screw into the wall. Ideally, you will use a level to ensure that these marks are not only even between the two studs, but also to make sure that the amount will not be slanted.
- Double check the bracket position. With your marks in place, it's time to position the mounting bracket on the wall. First, place the bracket flat against the wall, lining up one screw location with the first marked hole.
- Drill pilot holes. Using a drill, you'll need to drill pilot holes through the drywall and into the studs in the proper positions.
Position the Wall Mount. Hold the flat screen wall mount or TV mount brackets up against the wall, and use a level to make sure it’s even. Use a friend to help you hold the wall mount. Use a drill to make pilot holes into studs along where you’ve made the marks for mounting. Tip: Remember the old adage, “Mark twice.
1. Check the Specifications of Your TV. It’s important to consider the size and weight of your TV so you get the right wall brackets. Mounting brackets are rated by both screen size and weight capacity. Make sure to check your television’s manual for the exact dimensions and weight of your model.
People also ask
How do you mount a TV on a wall?
Can you put a TV on a wall without studs?
Can You mount a TV wall bracket to studs?
How many studs should a TV Mount have?
Can You mount a TV to a wall without damaging it?
Where should a TV be mounted?
Step 7 Step 7 Mount TV to Wall. Attach the mounting plate to the wall mount and ensure that all screws are tight and secure. If your mount is flush to the wall, this means simply placing the TV onto the wall mount and securing the bottom screws in place. If it’s a swivel mount, check to make sure that once you’ve connected the mounting ...
