Search results
Jan 20, 2021 · So take a plate off the wall and have a look inside. You can also use a thin poker like a steel ruler or wire to slip behind the wall cladding and feel for the stud. (mind the power etc) It is tempting to find one stud (or start beside a door/window) and then measure off 24"/600mm centers, or 18"/450mm centers, or whatever your home was built to.
Aug 5, 2023 · One option is to use an in-wall cable management system. This type of system will make it possible to run all the power cords and cable connections down through the wall, keeping them out of sight. If you don't want to run the wires through the wall, you can also use a cord cover to conceal the track running down to the floor.
Aug 21, 2023 · Mounting a TV to the wall without damaging it can be tough if you don’t have a stud to hold the weight. If you hang it from the bare wall board, you run the risk of damaging the wall and the TV.
- Becca Lewis
- Attach Bracket to TV. Attach the mounting bracket (not mounting plate) to the back of the TV.
- Mark Drill Holes. Hold the paper template or mounting plate against the wall, with the bubble level on top to ensure level. Make sure that you clear studs or other obstructions behind the drywall, as toggle bolts need at least two inches of clear space.
- Drill Holes for Toggle Bolts. Consult the toggle bolt package for the correct hole diameter. The diameter is not the diameter of the bolt. Instead, it will be the diameter of the wing unit attached to the bolt and folded up.
- Attach Toggle Bolts to Mounting Plate. From the front of the mounting plate (the side facing the room), slide the toggle bolts (unattached from the wing units) through the mounting plate holes.
Feb 18, 2024 · Step 2: Consider the Viewing Angle. Think about where you’ll be sitting when you watch TV. The middle of the screen should be at eye level for the best viewing experience. If you mount your TV too high, you might find yourself craning your neck, which can be uncomfortable during long movie marathons. If you plan to mount the TV above a ...
Nov 14, 2023 · Hold the stud finder against the wall and slowly move it horizontally until it indicates the presence of a stud. Mark the stud’s edges with a pencil to identify its position. If you cannot find centered studs, you can consider alternative anchor points for mounting your TV. These alternative anchor points can include:
People also ask
Can you put a TV on a wall without studs?
Can you put a TV on a wall?
Can you put a TV on drywall?
How do you mount a TV to a wall?
Can You mount a TV to a wall without damaging it?
Can you put a TV on a hollow wall?
Step 4: Prepare the TV. To attach the mounting plate to your TV, lay the TV face down on a soft, clean surface. Locate the mounting holes on the back of the TV. Attach the TV brackets or mounting plate using the provided hardware. If your TV has a curved back, use the kit’s spacers.
