Search results
The good news is that you can still mount your TV despite the hollow walls with Mount-It’s No Stud TV Wall Mount that hangs on your wall like a picture frame. Or, you can read on to learn other ways to mount a TV on the wall without studs. 1. Anchors. Anchors are some of the easiest ways to hang anything in the walls without a stud.
These are important as your mount will be the most sturdy when it’s anchored to studs rather than your drywall, which isn’t designed support the weight of a television. Use a stud finder and run it across the wall, marking where the studs are located. Use masking tape and write on top of it if you don’t want to write directly on your walls.
- Brian Westover
- Find the studs. Once you've settled on the perfect spot on the wall, you'll need to find the studs to mount the bracket properly. Mounting your TV wall bracket to the studs provides the structural strength necessary to support a TV that could weigh anywhere between 30 and 100 pounds.
- Mark the hole position. Next you'll need to mark specifically where you plan to screw into the wall. Ideally, you will use a level to ensure that these marks are not only even between the two studs, but also to make sure that the amount will not be slanted.
- Double check the bracket position. With your marks in place, it's time to position the mounting bracket on the wall. First, place the bracket flat against the wall, lining up one screw location with the first marked hole.
- Drill pilot holes. Using a drill, you'll need to drill pilot holes through the drywall and into the studs in the proper positions.
- Attach Bracket to TV. Attach the mounting bracket (not mounting plate) to the back of the TV.
- Mark Drill Holes. Hold the paper template or mounting plate against the wall, with the bubble level on top to ensure level. Make sure that you clear studs or other obstructions behind the drywall, as toggle bolts need at least two inches of clear space.
- Drill Holes for Toggle Bolts. Consult the toggle bolt package for the correct hole diameter. The diameter is not the diameter of the bolt. Instead, it will be the diameter of the wing unit attached to the bolt and folded up.
- Attach Toggle Bolts to Mounting Plate. From the front of the mounting plate (the side facing the room), slide the toggle bolts (unattached from the wing units) through the mounting plate holes.
You must screw into studs when mounting a TV on the wall. Do not use hollow-wall anchors, as they cannot support the weight of TV wall mount brackets and the television. Once you’ve picked an ideal location for hanging a TV on the wall, run a stud finder along the top of the paper. Locate the two studs in your wall that will support your TV.
Nov 14, 2023 · Mounting a TV can be a challenge when the studs are not centered. However, finding the correct stud positions is crucial to ensure the stability and safety of your TV mount. To locate studs with a stud finder, follow these steps: Start by selecting a good-quality stud finder that can accurately detect studs behind the wall.
People also ask
Does a TV wall have studs?
Can You mount a TV without a stud?
Can You mount a TV wall bracket to studs?
Can You mount a TV on drywall without studs?
How do you attach a TV to a wall?
Can you put a TV on drywall?
Attach the TV brackets or mounting plate using the provided hardware. If your TV has a curved back, use the kit’s spacers. Step 5: Hang the TV. Ask a friend or family member to help you lift the TV and hang it onto the wall bracket. Most mounts feature a locking mechanism or set screw with which you can secure the TV to the bracket.
