Search results
period of time the transmission should be equipped with an oil pump or cooler kit to insure proper lubrication. Note on the chart the effect low oil levels can have on safe operating angles. Allowing the oil level to fall 1/2” below the filler plug hole reduces the degree of grade by approxi-mately 3 degrees (5.5 percent).
- 3MB
- 126
This Manual is designed to provide informat ion necessary to service and repair the Eato n Fuller Transmissions listed on the fro nt. How to use this Manual The service procedures have been divided into two sections: In-Vehicle Service Procedures and Transmission Overhaul Procedures—Bench Service.
- 9MB
- 186
This service manual covers oil pumps and coolers for Fuller Heavy Duty Transmissions by Eaton Cummins.
- Proper Oil Level
- Draining Oil
- Refilling
Make sure oil is level with filler opening. Because you can reach oil with your finger does not mean oil is at the proper level. One inch of oil level is about one gallon of oil.
Drain transmission while oil is warm. To drain oil remove the drain plug at the bottom of the case. Clean the drain plug before reinstalling.
Clean case around filler plug and remove the plug from side of the case. Fill transmission to the level of the filler opening. If the transmission has two filler openings, fill to level of both openings. The exact amount of oil will depend on the transmission inclination and model. Do not overfill; this will cause oil to be forced out of the transm...
Subject: Transmission Main Case – Oil Cooler Port Thread Change Document Number: TAIB0864 Date: June 12, 2017 Updated: 12/03/2018 Change Description: Transmission main case oil cooler ports have been changed from 1/2” pipe thread to 3/4” straight threads on the following new production transmissions and service main cases. Affected Models:
Pro Gear Transmission has same day shipping and 1000’s of products in stock and ready to ship internationally for your next project. For parts or service contact the Eaton specialists at Pro Gear & Transmission, Inc. 1 (877) 776-4600 (407) 872-1901 parts@eprogear.com. Buy online at our store: https://www.pgttruckparts.com.
People also ask
How do I lubricate my Eaton Fuller transmission?
What is a Eaton Fuller Roadranger transmission?
Why are Eaton transmission lubricants used in oil cooling?
What tools do you need to reassemble a Eaton Fuller transmission?
What's new in transmission main case oil cooler ports?
Should I reassemble a Fuller transmission?
period of time the transmission should be equipped with an oil pump or cooler kit to insure proper lubrication. Note on the chart the effect low oil levels can have on safe operating angles. Allowing the oil level to fall 1/2” below the filler plug hole reduces the degree of grade by approxi-mately 3 degrees (5.5 percent).
