Search results
The Tri-Trim Gen 3 Case Trimmer utilizes The Taper-Lock cutter head to create clean, consistent and completely trimmed cases in one operation. The cutter head has adjustable carbide blades that will last a lifetime and leave burr-free cuts on the mouth of the case.
- The Original Case Trimmer: A Case Prep “System”
- Basic Trimming
- 3-Way Cutter
- Outside Neck Turning
In the above image, you can see the contents of the FORSTER Case Trim Kitwhich includes: 1. FORSTER Original Case Trimmer 2. Pilots 22, 24, 25, 26, 27, 28, 30 3. Collets 1,2,3 The FORSTER Original Case Trimmeris also available separately without the collets and pilots. There are also some great accessories available for the FORSTER Original Case Tr...
The most common use case for the FORSTER Original Case Trimmer is “basic trimming”, where the end of the case mouth is trimmed to length. Here’s what that setup looks like: Above we have: 1. Collet clamp T handle 2. Collet (stepped type) 3. Case being trimmed 4. Cuttter shaft with integral 4-flute cutter 5. Bearing 6. Stop collar with micro depth a...
An optional 3-way cutter attachmentis available for the FORSTER Original Case Trimmer which trims, chamfers the inside of the case mouth, and chamfers the outside of the case mouth all in a single operation! Installation is simple, it slips over the cutter shaft, and can be installed in just seconds: Setup is pretty much the same as when using the ...
Want optimal neck tension and chamber fit for your handloads? You should take a look at neck turning! With the addition of the Outside Neck Turning Accessory for the FORSTER Original Case Trimmer, you can turn case necks with your trimmer: As shown in the video, there are a few steps required to convert the FORSTER Original Case Trimmer over to nec...
The Tri-Trim Gen 3 Case Trimmer utilizes a 3 in 1 cutter head to create clean, consistent, and completely trimmed cases in one operation. The cutter head has adjustable carbide blades that will last a lifetime and leave burr-free cuts on the mouth of the case. The Tri-Trim Gen 3 Case Trimmer is machined from 6061-T6
The Auto Feed Attachment (for Case Trimmer—2 and Trim Pro® Manual Case Trimmer) advances the cutting tool evenly over the case neck with each turn of the trimmer handle; Read More
The Case Trimmer is unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by their own body taper. The Case Holder sits atop a set of stainless rails that are housed in two precision milled grooves in the base.
- 580KB
- 2
Trim a case and check it for overall length in a case gage. To check for overall length, set the case firmly into the case gage and set the gage on a clean, flat surface. The case mouth should be between the high and low step of the case gage (see page 10 for further infor-mation on reading a case gage).
People also ask
How does a case trimmer work?
What is a tri-trim Gen 3 case Trimmer?
What is the use case for the Forster original case Trimmer?
How accurate is a tri trim case Trimmer?
The Giraud Carbide blade is standard with the trimmer. It allows a 15 degree inside case mouth chamfer and 45 degree outside chamfer for smooth burr free seating of VLD style bullets. Dedicated power switch to turn the unit off and on. No more plugging and unplugging to use the trimmer.
