Search results
So, here is the list of material that I used for my mirror along with more clear instructions on how I cut my dimensions. I simply purchased all the materia...
- 3 min
- 148.3K
- Dan Scott
- Step 1
- Step 2
- Step 3
- Step 4
- Step 5
Measure the length and width of your unframed mirror. Let’s say that it’s 30 inches long by 22 inches wide. Meanwhile, being that stock 1″ x 3″ boards are actually (and yes, confusingly) 2-1/2 inches thick, we know that there would be a border of 2-1/2 inches running around the glass. So, from your twin planks of wood, proceed to cut four pieces—tw...
Cut a dado into each of your four wood pieces. In an assembled frame, the dado serves as the groove in which the mirror sits and remains securely held. In other words, you can’t skip this step. Though it’s possible to create a dado using a router, it’s much easier and more accurate to use a table saw. Here’s how to set up your cuts. First, attach a...
Select any one of your four wood pieces and get your miter boxand saw ready for action. Being sure to keep the dado oriented toward what’s going to be the inside of the frame, cut one end of the wood piece at a 45-degree angle. Next, select an edge of the mirror that matches up with the length of your board. Slip the mirror edge into the dado, lini...
Sand down any rough edges of your wood pieces, taking the time to remove sawdust with a damp cloth. Once the wood has dried out completely, go ahead and apply silicone glue to each joint and along the inside of the dadoes. Before the glue has begun to dry, fit the boards together around the mirror and wipe away any excess glue. Then, with a band cl...
If you trust yourself to handle the framed mirror gently at all times and if you don’t plan to move it very often in the future, you can probably stop here, trusting the glue to hold the frame together. But if you want to strengthen the construction, then you need to drive a nail or two into each corner. Be careful, though; a forceful impact could ...
- Manasa Reddigari
Dec 11, 2023 · Instructions For Building A Bathroom Mirror Frame. The first step is to measure your vanity mirror length and width. Using your miter saw, cut your wood at a 45-degree angle so the outside portion of your wood piece will be the full length of the mirror (see pic above). Make cuts for all four sides.
Step 3 Measure Again. Measure your mirror and materials again to ensure a proper fit. Select the wood you would like to use on the outer frame. Then measure the wood that you will want to be your outer piece. Mark the wood measurement on the outer edge of the wood. You want the corners of the moulding to meet at a 45 degree angle, so keep that ...
- Buy and Measure the Mirror. Determine the size of the mirror you’d like to frame. Here we used a 20-in. x 30-in. mirror. Be sure the unframed mirror is completely flat and smooth across its entire surface.
- Measure and Cut Parts. Measure and cut your 1×4 lumber (actual dimensions 1/2-in. x 3-1/2-in.) into four pieces, aiming to make a frame that protrudes 1-in.
- Dry-fit Frame Parts. Lay your cut frame pieces down on the mirror and see how they fit together. You should get a fairly tight, gap-free fit with 1-in. of the frame overhanging the edges of the mirror on all sides.
- Drill Holes for Pocket Screws. Note: This step and the next one aren’t strictly necessary. But they allow you to join the frame parts ahead of time, leading to a much tighter fit at the joints and an easier gluing process.
Step 9: Apply Second Coat of Paint. Paint a second layer of paint over fronts and sides of trim. Let dry 12 hours before installation. Apply at least two coats of paint to wood that will be used as frame for your bathroom mirror. Let dry on non-stick paper for 12 hours before installation.
People also ask
How do you frame a wooden bathroom mirror?
How do you paint a bathroom mirror?
How do you trim a bathroom mirror?
How do you put a mirror together?
How do you hang a mirror on a wall?
How do you glue a mirror to wood?
Apr 29, 2024 · Wipe the mirror gently in a circular motion to avoid streaks. For the frame, the cleaning method depends on the material. If it’s wood, dust it regularly with a soft, dry cloth. If the frame is painted or sealed, you can occasionally wipe it down with a damp cloth, but make sure it’s not too wet.
