Search results
Oct 8, 2024 · Cabinets with full overlay doors do not leave enough space to attach crown molding to the face of the cabinet. In this case, add a nailing cleat around the top perimeter of your cabinets. Measure and cut a 1×2 nailing cleat the full width of your cabinets and attach it to the top of the cabinet with 1-1/4-inch screws.
- Joe Cruz
Like and subscribe!How to measure the angles, cut the molding with a compound chop saw and nail it up using a nail gun. Adding crown molding to your kitchen ...
- 8 min
- Get It Done Home Repair
Oct 21, 2024 · Steps for hanging crown molding: Cut strips of the 5/4-inch pine to length and width based on the size of the cabinets. These will be the filler pieces. Make rabbet cuts on the filler pieces so that the piece fits tightly on the top of the cabinet and over the door of the cabinet.
Aug 1, 2021 · Step 2: Measure and Cut. The thing about installing cabinet crown molding is that you can’t assume that any angle will be perfectly 45-degrees. I find that holding the piece of trim up to the cabinet and marking where it needs to be cut or using an angle jig is the most effective way.
- 1
- 4 min
- Measure the Cabinets. Measure the cabinets to determine the quantity of crown molding to purchase. Run the tape measure along the cabinets, including all side sections.
- Mark the Front Crown Molding. Hold a 54-inch piece of crown molding so it is horizontal. Lay the molding lengthwise across the top-front of the cabinet. The crown molding should be tilted at a 45-degree spring angle.
- Mark the Left and Right Crown Molding. Hold a 15-inch piece of crown molding on the left side of the cabinet, one end butted against the wall. Tilt the molding at a 45-degree angle.
- Adjust the Miter Saw for the Front Molding. Add the crown stop to the miter saw so that the crown molding will be firmly supported at a 45-degree angle.
Nov 4, 2018 · Ask This Old House general contractor Tom Silva installs crown molding on kitchen cabinets with full overlay doorsSUBSCRIBE to This Old House: http://bit.ly/...
- 10 min
- 1.1M
- This Old House
People also ask
How to install crown molding on cabinets?
Who installs crown molding on kitchen cabinets with full overlay doors?
What angle should crown molding be installed?
How is crown molding installed?
How do you install a crown on a kitchen cabinet?
What type of doors do you need for crown molding?
Jun 2, 2023 · Determine the angles of both ends using a protractor. Setup your miter saw and use a crown jig to layout each cut. Cut the crown to length. If installing by yourself, use crown hooks or a support jack to hold longer pieces in place. Nail the crown to the cabinets. Hide nail holes with colored putty.
