Ad
related to: what is output module in fire alarm system design pdfSet up SimpliSafe in under an hour. No salesperson or technician has to come to your home. Set up SimpliSafe in under an hour yourself—or let an expert professional do it for you
- See Alarm Packages
Try it. Test it. Love or Return it
60-Day Full Money-Back Guarantee
- Starter Security Package
Start Protecting Your Home With
This Award-Winning Security System
- 24/7 Home Protection
See how SimpliSafe keeps home safe
See what's happening at home
- Customize Your System
Find the perfect system for your
home. Customize in minutes online.
- Early Access Black Friday
60% off Any New System
Customize yours today
- Read the Reviews
Reporters Across the Country Are
Raving About SimpliSafe—Here’s Why.
- See Alarm Packages
Search results
The wide range of input and output modules available from NOTIFIER delivers exceptional flexibility to a NOTIFIER fire detection and alarm system. Using these modules enables integration with a host of other building management and emergency systems, including access control systems, lifts, fire shutters and emergency lighting.
Fire Alarm Code, UL 864 Standard for Control Units for Fire Protective Signaling Systems, and ULC S527 Standard for Control Units for Fire Alarm Systems. Limitation of liability To the maximum extent permitted by applicable law, in no event will UTCFS be liable for any lost profits or business opportunities, loss of use, business
fire alarm system field device installation guide (can/ulc 524) (This page has been updated to include CAN/ULC 524:2019. Additional requirements are outlined in the Standard for Installation of Fire Alarm Systems that is referenced by the current Building Code in effect.
- 171KB
- 2
- COMMISSIONING
- INTRODUCTION
- USER & INSTALLER ACCESS CODES
- ACCESS LEVEL 1 - General User
- INTERNAL BUZZER SILENCE
- ALARM SILENCE/RESOUND
- SOUNDERS ENABLE/DISABLE
- DELAYS ACTIVE
- Ancillary Functions
- SYSTEM LIMITATIONS
- INTRODUCTION
- CONTROL PANEL
- Mains Power connection
- Other Panel connections
- REPEATERS
- PANEL CONNECTIONS
- Extra Display
- ANALOGUE LOOP(S)
- RECOMMENDED CABLES
- INTRODUCTION
- BUZZER SILENCE
- SYSTEM RESET
- LAMP TEST
- SOUNDERS ACTIVATE / SILENCE
- AUXILIARY RELAYS
- SOUNDERS DISABLE
- SELECTED DETECTORS
- DELAYS ACTIVE
- GETTING THE PANEL RUNNING
- GETTING AN EXTERNAL CHAMELEON DISPLAY RUNNING
- GETTING A CHAMELEON REPEATER PANEL RUNNING
- GETTING INTO PROGRAMMING MODE (ACCESS LEVEL 3)
- Function Selection
- Panel Check
- Analogue Loop Monitoring
- Open Circuit Test
- Conventional Sounder Monitoring
- Detector Tests
- Unassigned Detector Tests
- WRAPPING UP INSTALLATION AND COMMISSIONING
- Battery Fault Message Test
- Power Failure Test
- Keys to use within functions
- ESC
- General
- 1 Review Historic Log
- 1-3 Clear Historic Log
- 1-5 Read/Clear Autostart Count
- 3-1 Disable Zones
- 3-2 Assign Sounder Groups to Zones
- 4-1 Sounder Configuration
- 4-3 Disable Sounders
- 4-4 Assign Sounder Group to Device
- 4-6 Sounder Delay Set-up
- 4-7 Override Sounder Delays
- 5-2 Select Fault I/O Group
- 5-3 Assign I/O Group to Device
- 5-5 I/O Unit Action upon Evacuate
- 5-6 I/O Unit Delay or Immediate
- 5-8 Select Disable I/O Group
- 6 Device Set-up
- 6-1 General
- 6-1-1 Disable Loops
- 6-1-2 Device Disable
- 6-1-3 Set Selective Disablement
- 6-1-5 Set Immediate Evacuate for Device
- 6-1-6 Device Activation Overrides Delays
- 6-1-7 Inhibit Auxiliary Relays
- 6-3 Device Specific - Functions only available for panels programmed to ZEOS Protocol
- 6-3-4 Re-calibrate All Devices
- 6-3-6 Read Data Stored in Device
- Introduction
- General Guidelines
- 6-4-1 Activate ASET Mode (Automatic Address Settings)
- 7-1 Device Count, Type & Value
- 8-1-1 Set Date & Time
- 8-1-6 Enable / Disable Delays
- 8-1-8 Configure Disablement Timer
- 8-2 Special Features Set-up
- 8-2-1 Two Devices to Evacuate
- 8-2-2 Call Points to Evacuate
- 8-3 Memory - BEWARE, ENGINEERS ONLY
- 8-3-1 Checksums
- 8-3-2 Clear Non-Volatile RAM
- 8-3-3 Calculate Customer Flash Checksum
- 8-3-4 Calculate Program Flash Checksum
- 8-4 Other Features
- 8-4-1 Active/Installation Mode
- 8-4-4 Set User Access Code
- 8-4-6 Select Language
- 8-4-8 Set Installer Access Code
- 8-4-9 Set Master Access Code
- 8-5 Network Configuration
- 8-5-1 Configure Panel Number
- 8-5-2 Known Panels
- 8-5-3 Installation Status
- 8-5-5 Communication Channels
- 8-9 Version Information
INTRODUCTION THE PANEL BUTTONS CONTROLS DISABLEMENTS QUEUE REVIEW GETTING THE PANEL RUNNING GETTING AN EXTERNAL CHAMELEON DISPLAY RUNNING GETTING A CHAMELEON REPEATER PANEL RUNNING GETTING INTO PROGRAMMING MODE (ACCESS LEVEL 3) GETTING THE SYSTEM RUNNING WRAPPING UP INSTALLATION AND COMMISSIONING PROGRAMMING FUNCTIONS COMPLETE LIST OF PROGRAMMING ...
This document covers the installation and commissioning of a G-One fire alarm panel. This document is intended for use by a competent, qualified, fire alarm installation engineer. The G-One fire alarm system should be tailored to the building requirements. The complete system should be designed to meet all applicable regulations. The installation m...
► ▲ ▼ To access codes use the arrow keys and when finished press ENTER. NOTE: It is not possible to introduce text for labels using the front panel keypad. For text update the “Chameleon Connector Software” should be used.
Unless otherwise indicated, in order to enable the operation of a particular switch, either a valid User or Programming Access Code is required to be entered. The only exceptions are the following: - Lamp Test Switch - Queue Review Switches (Fire, Fault, Test and Disabled)
The occurrence of any new fire or fault condition will initiate the operation of the internal buzzer. By pressing this switch, the operation of the buzzer will be stopped until a new fire or fault appears on the system.
Activates all sounders. A second press silences all sounders. The button LED (Red) is ON whilst the sounders are activated.
Pressing this button will enable/disable all sounders, both conventional sounder circuits and addressable sounders.
Pressing this button will activate any preprogrammed delays. The Yellow LED associated with this button and the general disablements LED will both be lit. A second press of this button will deactivate the delays and the LED. Under any fire condition the delays will be activated. If during the course of these delays, at access level 1 (General User ...
Panel network connection ports Panel to PC programming software (upload/download) port. Auxiliary relays outputs
A fire alarm system can provide early warning of a developing fire, but it does not assure protection against damage or loss resulting from a fire. The fire alarm system should be designed and installed in accordance with all relevant regulations and codes of practice. To ensure maximum protection, the system should be regularly tested and inspecte...
This section covers the physical installation of the system. It primarily focuses on the parts that are required and how they should be connected together. Do not connect the mains power or the batteries at this stage; commissioning the system is covered in the next section of this manual. Installation should always be performed in accordance with ...
The control panel should not be located where access to the internal components are restricted and where the unit is exposed to high levels of temperature, moisture, vibration and shock. Any metal swarf could damage the PCBs. If any metal is present when the system is powered up, it is recommended that all PCBs are removed from their box whilst the...
All panels must be earthed. The LIVE connection must be made to the fused input on the power supply module. This input will have a Black or Brown wire leading into the power supply unit. The input with a Blue wire leading into the power supply unit is the NEUTRAL.
These are detailed in the relevant following sections. Most connections are made from the G-One mainboard.
Since all Chameleon Network panels follow a “multi-master” paradigm the CHAMELEON REPEATER is also a global system repeater and not a specific “panel” repeater. For this reason, CHAMELEON REPs are installed in a similar manner of a normal network panel with loops. NOTE: Each CHAMELEON REP will occupy a network address, just as a normal panel. The C...
ELECTRO-STATIC SENSITIVE DEVICES (ESD) TAKE SUITABLE ESD PRECAUTIONS WHEN REMOVING OR INSTALLING PRINTED CIRCUIT BOARDS. WARNING - observe ESD precautions when handling the PCBs.
The Chameleon Display is commonly used when one or two simple display repeaters are needed on a “not networked” G-One. NOTE: Maximum two Chameleon Display connected. The Chameleon Display does not have a network address. Chameleon Displays are installed in a similar manner to Control Panels. Each G-One panel can supply a maximum of 2 Chameleon Disp...
The Analogue Loop provides the connection to all the analogue addressable devices and loop powered sounders. Unless the loop is completed the panel will not be able to monitor its integrity (open and short circuit monitoring). Devices that can be fitted into the Analogue Loop include smoke sensors, heat sensors, Zone Monitoring Units (ZMU), I/O uni...
Analogue Loops, Conventional Sounders and Data Loops
Commissioning involves checking that all connections have been properly made and all hardware is functioning correctly. This means the system must be initially installed in accordance with the previous section of this manual. The panel default mode is ‘Installation mode’. In Installation Mode the green SYSTEM ON LED will flash on and off. The panel...
The occurrence of any new fire or fault condition will initiate the operation of the internal buzzer. By pressing this switch, the operation of the buzzer will be stopped until a new fire or fault appears on the system.
Soft resets the entire system. A soft reset should be satisfactory under almost all circumstances, however a Master Reset can be performed by cycling the power on the Panel (removing both primary AC and secondary DC supplies). NOTE: If an alarm has been detected, it is necessary to silence the alarms using SOUNDER SILENCE before the SYSTEM RESET bu...
General User Access (no code entry required). Lights all the LEDS, turns on the LCD back light and sets all display pixels to black. Lamp test only operates whilst the key is depressed.
Activates all sounders. A second press deactivates all sounders. The adjacent LED is ON whilst the sounders are activated. It is possible to define if pressing the SOUND ALARMS button will activate the systems Fire I/O's.
When this button is activated all relays and I/O modules connected to the system have their outputs disabled. This includes the normally energized FAULT relay, the FAULT I/O group and all ALARM I/O groups. When these outputs are disabled the button LED is ON. Pressing the button again restores normal relay and I/O module operation. NOTE: IF I/O'S A...
When this button is activated, all sounders will be disabled and the LED will be lit. Pressing it again will re-enable the sounders and the LED will turn off.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
This function allows the installer to check which software and firmware version is running on the current Panel.
3.5 Output Module a) Output module shall mean addressable points from the Fire alarm control panel with potential free contacts for tripping of AHU s power supply etc. as required. b) The system shall also be able to handle separate modules to interface the speakers of the public Address system.
- 526KB
- 17
Fire Detection Systems This Design and Installation Guide provides a simple guide for the provision of a fire detection and alarm system in accordance with the recommendations detailed within the British Standard Code of Practice BS 5839-1:2017. It is designed to act as an aide-memoire and there is no
People also ask
What are the output modules?
What are the features of a fire alarm control unit?
How to send analogue output to fire alarm control panel?
What type of power supply should a fire alarm control unit use?
What is a G-one fire alarm installation & commissioning document?
What is a supervised interface to Notifier fire alarm control units?
This section of the specification includes the furnishing, installation, and connection of an intelligent reporting, microprocessor controlled, addressable, fire detection and emergency alarm communication system.
