Search results
n apply to bot. sides of a3-member beam.16d box nails = 0.135” diameter x 3.5” length, 16d sinker nails = 0.148”. iameter x 3.25” length.Beams wider than 7" must be designed. the engineer of record. All values in these tables may be increased by 15% for snow-load roofs and by 25% for non-snow load roofs wher.
- 3MB
- 8
JHUV QRW VKRZQ IRU FODULW\Find: A multiple 13⁄4" ply Versa-Lam® that is adequate to support the design loads and the member's. 14' / 2 + 18' / 2 = 16'Use PLF tables on pages 3-5 of this guide. y support the design loadsCalculate the maximum plf load from one side (th.
- 1MB
- 8
n perpendicular to joist length. Attached to the bottom flange of the joists using 11⁄4 inch (32mm) Type W drywall screws. at 12 inches (305 mm) on center. The end joints of the wallboard must be centered on the bottom flange of the joist and must be staggered the equivalent of two joist spacin.
Engineered to Perform. Versa-Lam beams are strong throughout, engineered to support heavier loads, and provide longer spans than stock glulams (24F-V4) or dimensional lumber products. Versa-Lam LVL beams and headers won’t twist, shrink, or split, resulting in flatter, quieter floors and strong structures saving time while protecting reputations.
TitleResource TypeResource-category_hfilterRegion_hfilterGuide de conception & d’installation pour ...Multi-Fam/Light Comm, Safety & Firemflc safety-firecanada-eastMulti-Family & Light Commercial Promo ...Multi-Fam/Light Commmflcus-east us-west canada-east canada-westCCMC 12472F VERSA-LAM® LVL French Code ...Code Reportcode-reportcanada-east canada-westCCMC 12472E VERSA-LAM® English Code ...Code Reportcode-reportus-east us-west canada-east canada-westWestern US BCI® and VERSA-LAM® Installation Guide (Letter size) Western US Commercial Guide (Including Glulam Beams) Boise Glulam Beam and Specifier Guide. EASTERN US - For I-Joist and LVL lumber products manufactured in Alexandria, Louisiana; Thorsby, Alabama; and St. Jacques, New Brunswick. Eastern US BCI® and VERSA-LAM® Specifier Guide.
Boise Cascade; Specifier Guides, Builder Guides, Installation Guides, Commercial Guides and Code Reports
People also ask
Do you need a smoke detector in a Boise Cascade?
What are Boise Cascade Wood Products?
Are Boise Cascade Wood products Leed certified?
Are Boise Cascade Wood products green certified?
Does Boise Cascade have a fire retardant treatment?
Who is Boise Cascade?
Attached to the bottom flange of the joists through the first layer using 15/8 inch (41mm) Type W drywall screws spaced at 12 inches (305mm) on center on intermediate joists and 6 inches (152mm) on center at end joints. The longitudinal joints of this layer must be offset 24 inches (610mm) from those of the base layer.