Search results
You can easily hide the cables from your TV by either running them behind the wall or by hiding them along the wall with a paintable cable cover. If you’re running them behind the wall, create two holes – one behind your TV and one where your cable box or entertainment system will go.
- TV Wall Mount
The one inch gap the T-102-MTM leaves lets your TV hug the...
- The Home Depot Canada
{ "dirty": true, "raw": "7444f87-dirty", "hash": "7444f87",...
- Screwdriver
Designed to work for you in delicate high-accuracy...
- Stud Finder
Bosch Digital Wall Scanner for Wood, Metal and AC Wiring,...
- TV Wall Mount
Mar 22, 2020 · In this video, we'll go over the entire process for mounting a TV to a wall. We used an articulating mount, but this process is almost the same for other mou...
- 10 min
- 2.1M
- Jonah Matthes
Jan 13, 2023 · Most walls can support a TV, but you need to be more careful if you’re mounting on a stud wall. Here’s what you need to look out for… Brick walls. These walls are fine for mounting TVs of any size. Just make sure that the mount goes into the brick itself and not the mortar. This is because brick gives you a much more secure fitting.
- Overview
- Installing the Wall Mount
- Wiring an In-Wall Power Extender
- Connecting Your Hardware
Mounting a TV on your wall allows you to watch it comfortably without using an entertainment center, but the cables may look messy when they hang down. While it’s against electrical code to run your TV’s power cable behind your wall, you can install an in-wall power extender that allows you to add a new outlet without any complicated wiring. Start by choosing a mount that’s compatible with your TV and attach it to your wall. Once you have the mount in place, cut holes in your wall so you can run the wires between the power extender receptacles. After installing the extender, hang the TV on the mount and plug it in!
Purchase a wall mount that fits your TV.
Hang the wall mount where there are studs in the wall for support.
Wire an in-wall power extender that will be hidden behind the TV.
Choose a wall mount that can support the weight of your TV.
Look for the dimensions and weight of your TV in its instruction manual or on its box so you know how much the mount needs to support. Find a mount at an electronics store or online and check the maximum weight and size that it can hold. Opt for a full-motion mount so you can tilt and swivel your TV if you need to make adjustments.
Try searching online for your TV’s model number followed by “mount” if you want to ensure the mount works with your television. You can usually find the model number on a sticker on the back of the TV or printed on the box.
If your TV is lighter than 80 pounds (36 kg), you can use a mount that attaches vertically. If your TV weighs more, you’ll need a mount that secures horizontally so it evenly distributes the weight.
If you aren’t going to mount the TV into studs, use anchor bolts to keep the TV from falling off of the wall.
so it’s at your eye level when you watch it.
Get an in-wall power extender.
An in-home power extender has 2 receptacles that connect behind your wall and provide power to an additional outlet. When you plug the lower receptacle into a wall outlet, it will provide power to the upper receptacle that you can hide behind the TV. Look at an electronics store or online for a power bridge that has built-in power connectors so it’s easier to wire.
You can buy in-wall power extenders from electronics stores or online for between $40–100 USD.
Trace the outlines of the power extender receptacles on your wall.
Hold the upper receptacle against your wall in a spot that your TV will cover once you hang it. Use a pencil to draw an outline around the receptacle. Place the lower receptacle straight down from the first one so it’s at least 6 inches (15 cm) off of the ground, and draw the outline on your wall. The lower receptacle will be visible on your wall, but you can easily hide it behind a shelf or entertainment center.
Make sure both receptacles are between the same studs if your wall has them so it’s easier to fish the wires.
Screw the vertical brackets from the mount onto the back of your TV.
Position the brackets on the back of your TV so they line up with the 4 screw holes near the corners. Feed the screws provided with the mount through the holes in the bracket and tighten them by hand. Finish screwing them in with a screwdriver so the bracket is tight against the back of your television.
Some mounts may have X-shaped brackets.
Don’t overtighten the screws, or you could damage your TV.
Secure the brackets to the mount on the wall.
Look for the clips or hooks on the bracket that attach to the mount on your wall. Lift your TV and set the brackets onto the lip at the top of the mount so it supports the weight of your TV. Check if there are any screws on the bracket or mount that you need to tighten so the TV doesn’t fall off of your wall.
Make sure you follow your TV’s specific manufacturer’s instructions for mounting to the wall. Double-check that the connection between the wall plate and TV plate is secure. Use a cord cover to hide the cables dangling from the bottom of the TV if they aren't installed behind the wall.
If you live in a rental or don't want to permanently alter your walls, mounting a TV on the wall without drilling any holes can be a perfect alternative. Using adhesive strips or hooks is one method of hanging a TV on the wall without making any holes in the wall.
People also ask
Can you put a TV cable behind a wall?
Should I mount my TV on a wall?
Can you hang a TV on a wall?
How to mount a TV?
Can You mount a TV on a wall without studs?
How do you mount a TV on a brick wall?
Dec 7, 2022 · Learning how to wall mount a TV gives you the power to make one of the biggest upgrades for your home theater (outside of buying a new TV or a fancy sound system).
