Ad
related to: Can you put a TV on a metal stud?Find Deals on a tv mount in Electronic Accessories on Amazon.
Search results
Step 2: Installing the Hardware to the TV. The next step is to install the frame on the TV. Start by installing the vertical arms to the TV. We used a spacer here because there’s a ridge on the TV and a spacer brings the arm slightly out. Once you’ve installed the vertical arms, you can go ahead and install the horizontal bracket.
- Purchase the Correct Hardware. Image via Amazon. Typical lag bolts or screws are perfect fasteners when your wall studs are made from wood. Unfortunately, metal stud construction complicates the process and requires different hardware for proper support.
- Find the Studs. Just like their wooden counterparts, you’ll be able to locate your metal studs behind the drywall with a stud finder. Most metal studs are only about 1.25" wide and drilling in the exact center will be critical.
- Pre-drill the Pilot Holes to Ensure Proper Placement. You'll ultimately need to drill a 1/2" hole to fit the snap toggle, but to ensure the hole is precisely in the center of the stud, you should use a smaller drill bit first.
- Insert the Hardware and Attach the Bracket. You’ll need to install the snap toggles vertically so that they line up with the metal studs. This will ensure that the wall bracket sits flat on the wall and doesn't rock.
- Get The Right Fasteners. Here are three different fasteners that will work: #1 – Toggle Bolt. #2 – Self Drilling Toggle Anchor. #3 – Snap Toggle (Recommended)
- Locate the Metal Studs. It’s important that you find the EXACT CENTER of the stud. Metal studs aren’t very wide (typically about 1.25″). Since you will be drilling a 1/2″ hole in the stud, that only leaves about 3/8″ of metal on either side of the whole.
- Determine the Mounting Location for the TV. You probably want your TV at a certain height and at a certain location side-to-side on the wall. So before drilling your holes, figure out exactly where you want to mount the TV so you know where to attach the tv wall mount bracket.
- Drill Some Holes! For most of the fasteners I recommend, you’ll need a 1/2″ hole in the wall. So, you’ll need a 1/2″ metal drill bit to drill those holes.
Mark the center of each stud with a pencil. Mark the mounting holes: Align the TV wall mount bracket with the metal studs and mark the screw holes on the wall. Make sure the bracket is level. Drill pilot holes: Put on safety goggles and drill pilot holes at the marked center points. Use a drill bit that matches the size of the anchors you'll be ...
In this episode of Kanto Explains, we show you how to mount a TV on a steel stud wall.We teach you all the tools you need, how to drill into the steel studs...
- 8 min
- 207.9K
- Kanto Solutions
Jan 9, 2021 · Installing the Wall Plate for the TV Mount. The next step is to install the wall plate for the TV mount. Place the wall plate against the wall, making sure the holes align with the center of the metal studs. Mark the holes with a pencil and drill pilot holes using a power drill.
People also ask
Can You mount a TV in metal studs?
How do you install a TV stud on a wall?
What is the difference between a TV Mount and a wooden stud?
Can You mount a TV to a wall?
How do you mount a TV on a stud finder?
Can You mount a TV with metal framing?
Jun 25, 2024 · Here are the steps for hanging a TV mount to metal frames: Step 1. Have your hardware and tools handy. This includes your drill, level, stud finder, anchors, screws, and mounting brackets. Step 2. Find the studs. Use your stud finder to slowly move back and forth over the area you want to mount the TV.
