Yahoo Canada Web Search

Search results

  1. The 17-inch side faces the pitcher's plate, and the two 12-inch edges coincide with the first- and third-base lines. The back tip of home plate must be 127 feet, 3 and 3/8 inches away from second base. The other bases must be 18-inch squares that are between 3 and 5 inches thick, covered by white canvas or rubber and filled with soft material.

    • Field

      Mound to home plate distance - The distance between the...

  2. Mound to home plate distance - The distance between the pitcher's plate and home base (the rear point of home plate) shall be 60 feet, 6 inches. Base paths/distance - The infield shall be a 90-foot square. When location of home base is determined, with a steel tape measure of 127 feet, 3 3/8 inches in desired direction to establish second base.

  3. 1-2-2 All lines on the playing field shall be marked with a material which is not injurious to the eyes or skin. All non-permanent lines should be white. Lime or caustic material of any kind is prohibited. 1-2-3 The on-deck circle should be to the side and away from home plate, 37 feet if space allows. Neither team’s players shall warm up in ...

  4. May 1, 2020 · A distance of 320 feet or more along the foul lines, and 400 feet or more to center field is preferable. The infield shall be graded so that the base lines and home plate are level. The pitcher’s plate shall be 10 inches above the level of home plate. The degree of slope from a point 6 inches in front of the pitcher’s plate to a point 6 ...

  5. The infield is exactly the same, with a 90ft-by-90ft diamond and a 60ft 6in long pitching distance. The outfield for high school baseball will measure at least 300ft down the foul lines on the left/right field and 400ft down the centerfield from the home plate.

  6. Tips and Notes: Softball. Softball rules are very clear about base paths and backstop distances. The skinned infield must extend at least 3 feet past the foul line before grass starts and backstops must be a minimum of 25 feet from the back of home plate. The accepted diameter for the pitching area is 16 feet.

  7. People also ask

  8. 99baseballs.com › the-field › home-plate-specs-distanceHome Plate – Baseball Field

    Jul 21, 2023 · 0 Comments. Home plate is a five-sided slab made of a whitened rubber, a shift from the original materials of marble or stone used in baseball’s early days. The pointed end of a plate is usually aligned to face due east to minimize the batter’s glare from the setting sun. The size of plate in baseball are standard across all levels of play ...

  1. People also search for