Search results
Feb 14, 2023 · It’s not too difficult to replace the control switch as long as you make sure to purchase one that’s compatible with your car. Reason #4: Battery Cable Connections Since the driver-side door controls are part of an electrical system, it only makes sense to check out the electrical components as well.
Jul 3, 2021 · Step 10: test and put everything back. Before you reassemble the whole door, simply plug the switch into the two connectors and verify that everything works. If yes, unplug the switch and reinstall it in the door panel, then put everything back together. If no, then cry in the corner and start again, or give up.
Remove the door carpet. The next thing you want to do is to remove the door carpet using auto trim removal tools. Locate and remove the clips and screws on the door carpet. Once all the screws are loosened, gently pop off and remove the power button knobs, be careful not to break the knobs. Gently pop up and remove the lock on the power handle ...
Aug 30, 2016 · Step 5: Locate the door with the faulty door lock switch. Using a flat tip screwdriver, slightly pry up all around the door lock cluster panel. Pop out the cluster panel and remove the harness from the cluster. Step 6: Slightly pry on the locking tabs on the door lock switch. Do this with a small flathead screwdriver.
- (28)
- Marvin Sunderland
Sep 1, 2016 · Step 3: Replace the door lock actuator bolts and screws. Reinstall the three screws into the door lock to secure it in the door. Then reinstall the two 10mm bolts above and below the location of the door lock actuator to secure the actuator. Step 4: Reattach the clips and cables.
- (485)
- Marvin Sunderland
Apr 11, 2024 · Possible reasons why the driver’s side electric door lock is not functioning. The problem with your car’s power door lock, like any other mechanical or electrical issue, has a cause. A faulty actuator, heavy usage, or simply old age could be at blame. The reasons can be explored. Dead key fob battery. Faulty key fob. A blown fuse. Wiring ...
People also ask
Is it difficult to replace a driver side door control switch?
How do you remove a door lock switch?
How do I fix a broken door lock switch?
Are driver side door controls dangerous?
When should a door lock actuator be replaced?
How do I install a pop-out door lock switch?
May 5, 2012 · Unscrew the following 3 screws: 6. Unscrew this screw and unhook two black plastic latches as shown: 7. Unhook two electrical connectors from the actuator; note where the arrow is; this is a little tab that you need to press in the direction of the arrow and then pull out the connector. Not easy as it is a bit cramped.
