Search results
May 14, 2019 · Industry standards and manufacturer recommendations of 33% or less offset for tiles with one or more sides 15” or greater are required because of the manufacturing process for tile. When ceramic tile is heated and cooled in the kiln, warpage can occur. This is a normal result of the manufacturing process. Many tile factories are excellent at ...
- Magazine
TileLetter is the industry's leading tile magazine. Friday,...
- News
Timely information about the industry, including hot new...
- Events
Current announcements about conferences, trade shows, and...
- Member Spotlight
Fast-track, complex casino project earns CBFI a NTCA...
- Ask The Experts
Stone tiles in showers – precautions. Michelle Chapman-June...
- Magazine
Jul 30, 2012 · By moving the intersection of the two ends of the tiles to the 33% location from the 50% location, the lippage is significantly reduced and most times provides an acceptable appearance. Many tile manufacturers now recommend that their products be installed with the 33% offset which further supports tile mechanic’s need to install a tile ...
- 33% Offset Reduces Lippage
- Running Bond Grout Joint Requirements
- What Are Your Customer's Offset and Grout Joint Expectations?
Moving the intersection of the two ends of the tiles to the 33% location (as you can see in the photo above) from the 50% location (as you can see in the image below) significantly reduces lippage and most times provides an acceptable appearance. Many tile manufacturers now recommend that their products be installed with the 33% offset which furthe...
The other issue that is a crucial part of the successful offset pattern installation has to do with the size of the grout joint. The ANSI A108.02 Installation Standard has a section devoted to specifying the size of the grout joint, particularly when one of the tile sides being installed is greater than 15”. Before we begin this explanation, let's ...
As you know, the beauty and longtime satisfaction with ceramic and porcelain tile installations often depend on the creativity of the design. Whether it's the owner, the architect, the designer, the retailer, or the installer who provides the pattern and layout suggestions, the end customer must be happy with the final appearance. In other words, t...
- Scott Carothers
May 26, 2020 · If your tile is a Pressed Floor Tile (this does not include porcelain), the maximum allowable edge warpage is limited to the following (the minus and plus means the tile could be warped downward or upward): Natural: -0.12" to +0.12”. Calibrated: -0.08” to +0.08”. Rectified: -0.05” to + 0.05”. Keep in mind that with tiles becoming ...
- Scott Carothers
- 33% offset recommendations for LFT. ANSI also provides the standards which guide the installation of ceramic tile (which includes porcelain) when the specified tile is 15″ or longer on any one side (popularly known as large-format tile or LFT).
- Straight stack. A tile pattern of square or rectangular tile that has grout joints aligning in both the north/south and east/west directions is known as a straight stack or stack bond.
- The 33% offset reverse. Rather than having the two low points adjacent to the high point as in a 50% offset, the tile in row one is moved to the one third point (33%) of the tile in row two.
- The 33% offset stairstep. In this 33% offset stairstep pattern, rather than switching back and forth as in the 33% reverse, it continues in one direction forming a stairstep appearance.
Nov 1, 2024 · Natural or handmade tiles have the most variation, while calibrated tiles are manufactured to be consistent in dimension but acquire some warpage during the kiln firing at the end of the process. Rectified tiles are ground down to size after firing, meaning they have the most precise dimensions, making them your best bet for minimal lippage brick patterns, sometimes even in larger formats like ...
People also ask
Why do ceramic tiles need a 33% offset kiln?
Should tile be set in a 33% offset pattern?
Should a brick joint pattern be offset 33%?
Do tile mechanics need a 33% offset?
What is a 50% offset tile pattern?
Can a 50% offset tile be installed?
The recommended off set is because of the curve that exist in porcelain tile, it’s not flat. So if you set it with a 1/16” grout joint at 50% off set, there would be an unacceptable amount of lippage for most people.
